|
|
|
| VB-2021-MD |
Air
or Force dry. |
Established
VM Basecoat For
un-primed
Polypropylene, Polyethylene, TPO and
thermoplastics. Not intended for
use on ABS and Polystyrene. |
| VB-4784-LV |
Air
or Force dry.
|
V.O.C.
Compliant version of VB-2021-MD. |
| VB-4858 |
Air
or Force dry.
|
Flow
Coat version of VB-2021-MD. |
| VB-4885 |
Air
or Force dry.
|
A
hard, Fast Dry, Low Cost,
High Solids, Flow
Coat VM Basecoat for ABS,
Polystyrene and all thermoplastics. Not
for un-primed and untreated
Polypropylene. |
| VB-4873 |
Air
or Force dry.
|
A
high
solids, high build Basecoat
version of VB-4885 for Rough
Substrates. |
|
|
|
2K Chemical
Resistant VM Basecoats |
|
|
Product
Name |
Cure
Requirements |
|
Product
Description
|
|
|
|
|
| VB-4880 |
Air
or Force dry.
|
A
low cost 2K Basecoat for ABS, Acrylic,
Thermoplastics, primed or flame
treated Polypropylene and Nylon.
Not intended for use on
Polystyrene. |
| VB-4810 |
Air
or Force dry. |
A
Heat
resistant 2K Basecoat
for
Nylon, SAA, Thermoplastics, and
primed or flame treated
Polypropylene. Not intended for
use on ABS, Acrylic or
Polystyrene. |
|
|
|
|
|
Heat
Resistant -Thermal Cure VM
Basecoats |
|
|
Product
Name |
Cure
Requirements |
|
Product
Description
|
|
|
|
|
| VB-4360-SP |
Flash
15 minutes. Force Dry 1 Hr. at
250 degrees F. |
Established
VM
Basecoat for Nylon, GTX,
PC, BMC, Metal, PET, Thermoplastics
and Primed or Flame Treated
Polypropylene. |
| VB-4777 |
Flash
15 minutes. Force Dry 1 Hr.
at 230 degrees F. |
A
more thermally stable, better
flowing, lower cure temperature
requirement version of
VB-4360-SP. |
| VB-4774 |
Flash
15 minutes. Force Dry 1 Hr.
at 250 degrees F. |
High
Solids, High Build Heat
Resistant
Basecoat for rough substrates. |
| VB-4772 |
Flash
30 minutes. Force Dry 1 hr. at 265 degrees
F. |
CD/V
Basecoat for Zenoy,
Nylon, Valox, High
Temperature Polycarbonate,
Primed TPO and GTX |
| VB-4136 |
Flash
10 minutes. Force Dry 15 minutes
at 280 degrees F. |
High
Temperature, fast cure Basecoat for
Nylon, Valox, Zinc Die
Cast, steel and Metal. Not for
use over Aluminum. |
