 |
VTW-4532-1
Rapid Cure High Temperature VM Topcoat |
 |
|
|
Description
|
|
VTW-4532-1 Rapid Curing High Heat VM Topcoat has been designed for use on
general purpose interior surface
finishing applications.
Among its attributes, VTW-4532-1
delivers extremely low foaming
properties and requires relatively short
cure times at low temperatures. In
addition, VTW-4532-1 exhibits very good specularity,
plate adhesion and optical properties.
|
|
|
|
|
|
Properties
|
Values
|
Notations
|
|
Specific Gravity:
|
1.00 - 1.11
|
at 77 °F.
|
|
Pound/Gallon:
|
8.33 - 9.26
|
at 77 °F.
|
|
Solids content:
|
+
50 %
|
Range by weight
|
|
Viscosity:
|
38 - 44
|
#3 Zahn Cup
|
|
Spread:
|
1960 sq/ft
|
at .50 mills (approximate)
|
|
Boiling Range:
|
182 - 349
|
°C
-°F
|
|
Flash Point:
|
53
|
°F
(TCC)
|
|
V.O.C. Content:
|
< 2.5
|
lb/gl
|
|
|
|
|
|
Other Information
|
|
|
|
DOT Classification:
|
Flammable Liquid
(FL)
|
|
|
HMIS Rating:
|
2-1-0
|
H-F-R
|
|
|
|
|
|
Application
|
|
|
|
Method:
|
Apply by Flow Coat, Dip,
Conventional
and
HVLP Spray.
|
|
|
|
|
Reduction
|
|
|
For flow Coat and Dip:
|
Reduce 1:2, or as much as
1:3 with water.
|
|
For Spray:
|
Reduce 1:1, or as much as
1:2 with water.
|
|
|
|
Cure Cycle
|
|
Flash off 5 minutes. Cure
to a minimum part temperature of 285
degrees F., for 15 minutes.
|
|
|
|
Storage
|
|
Store in tightly sealed
containers, at ambient temperatures.
Protect from moisture, evaporation and foreign
materials. Process ability of this product
can be adversely affected by evaporation
and contamination.
|
|
|
|
Shelf Life
|
|
6 months, provided
materials are kept in sealed original
containers under specified conditions.
Storage beyond this period can produce
higher viscosities.
|
|
|
|
Availability
|
|
VTW-4532-1 is available in 5 and 55 gallon epoxy
phenolic lined steel containers. Please
contact Pearl Paints for ordering
information.
|
|
|
|
|
|
|
