 |
Application
Information for SPW-970 DURA Cure Color
Coatings |
|
|
|
|
|
Usage
|
|
|
|
Mix:
|
Mix
SPW-970 color coatings
thoroughly before use. Mild settling
may occur if unused for prolonged periods
of time.
|
|
|
|
Reduction:
|
If necessary, reduce by
weight or volume at the rate of 95% paint
to 5% water. If further reductions are
required, reduce with water in increments of 5%. Maximum reduction should not exceed
20%.
|
|
Application Method:
|
Apply by HVLP and
Conventional Spray
|
 |
|
|
Dry Time
|
|
|
|
SPW-970 DURA Cure Color
Coatings become tacky to the touch when
air dried, within 30 minutes and may be handled
within 60 minutes of application. Complete
cure will be achieved after all water has evaporated from the coating film.
Coating dry times may vary, however DURA
Cure Water Base Colors normally dry with 30
minutes of cure at 180 degrees F.
|
|
|
|
Properties
|
|
Initial Adhesion:
|
100% adhesion on ABS, Acrylic, Polycarbonate,
PPO, Valox, Nylon and
Polystyrene Plastics.
|
|
Adhesion after 72 hrs:
|
100% adhesion at the cross
hatch.
|
|
Water emersion:
|
No evidence of whitening of the coating
or blistering of the coating surface after
240 hours water emersion and 5 minutes
recovery. Testing performed at 104 degrees F.
|
|
|
|
Pencil Hardness:
|
2H.
|
|
|
|
Storage
|
|
Store in tightly sealed
containers, at ambient temperatures. Protect
from moisture and foreign materials.
Process ability of this product can be
adversely affected by contamination.
|
|
|
|
Shelf Life
|
|
6 months from the
original date of manufacture.
|
|
|
|
|
|
|
